As the seasons change and temperatures drop, dealerships who service rural lifestylers, large property owners and landscape contractors often find themselves educating their customers on best practices for safety of both their person and their equipment. The Outdoor Power Equipment Institute (OPEI) offers these tips for generator safety.
Back to the Basics on Generator Safety
Dealers looking to support their customers can benefit from sharing these tips for generator safety. While sales, parts and service staff are available at the dealerships to offer help once a problem occurs, it’s vital to not assume customers are aware of the basics to safety, especially as generator sales continue to rise and winter storms continue to wreak havoc across the country.
“Not having power when you need it is frustrating, so a generator can provide emergency backup power at a reasonable cost,” says Kris Kiser, president and CEO of OPEI. “It’s important to follow all manufacturer’s instructions, and never place a generator in your garage or inside your home or building. It should be a safe distance from the structure and not near an air intake.”
10 Timely Tips for Dealers to Offer Customers
- Take stock of your generator. Make sure equipment is in good working order before starting and using it. Do this before a storm hits. This includes reviewing the directions, following all manufacturer’s instructions, reviewing the owner’s manuals (look manuals up online if you cannot find them) so equipment is operated safely.
- Install a battery-operated carbon monoxide detector in your home. This alarm will sound if dangerous levels of carbon monoxide enter the building.
- Have the right fuel on hand. Use the type of fuel recommended by the generator manufacturer to protect this important investment. It is illegal to use any fuel with more than 10% ethanol in outdoor power equipment. (For more information on proper fueling for outdoor power equipment, click here). It’s best to use fresh fuel, but if you are using fuel that has been sitting in a gas can for more than 30 days, add fuel stabilizer to it. Store gas only in an approved container and away from heat sources.
- Ensure portable generators have plenty of ventilation. Generators should never be used in an enclosed area or placed inside a home, a building, or a garage, even if the windows or doors are open. Place the generator outside and away from windows, doors, and vents that could allow carbon monoxide to drift indoors.
- Keep the generator dry. Do not use a generator in wet conditions. Cover and vent a generator. Model-specific tents or generator covers can be found online for purchase and at home centers and hardware stores.
- Only add fuel to a cool generator. Before refueling, turn the generator off and let it cool down.
- Charge and use battery-powered generators/inverters properly. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may not be compatible with another battery pack. Follow all charging instructions and do not charge the battery pack or equipment outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery.
- Plug in safely. If you don’t yet have a transfer switch, you can use the outlets on the generator. It’s best to plug in appliances directly to the generator. If you must use an extension cord, it should be heavy-duty and designed for outdoor use. It should be rated (in watts or amps) at least equal to the sum of the connected appliance loads. Make sure the cord is free of cuts, and the plug has all three prongs.
- Install a transfer switch. A transfer switch connects the generator to the circuit panel and lets you power hardwired appliances. Most transfer switches also help avoid overload by displaying wattage usage levels.
- Do not use the generator to “backfeed” power into your home electrical system. Trying to power your home’s electrical wiring by “backfeeding” – where you plug the generator into a wall outlet – is dangerous. You could hurt utility workers and neighbors served by the same transformer. Backfeeding bypasses built-in circuit protection devices, so you could damage your electronics or start an electrical fire.
